ActiveSync synct nicht

classic Classic list List threaded Threaded
15 messages Options
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

ActiveSync synct nicht

Moin.

Hier mal ein kleiner Ausschnitt aus dem activesync Log:​
​[DEBUG] [USER] -------- Start
[DEBUG] [USER] cmd='FolderSync' devType='Android' devId='android0000000000000' getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603' method='POST'
[DEBUG] [USER] activesync_backend::__construct() username=USER, loose_provisioning=FALSE, autheticated=TRUE
[DEBUG] [USER] SqlStateMachine(): init
[DEBUG] [USER] Backend implementation of IStateMachine: activesync_statemachine
[DEBUG] [USER] SqlStateMachine->GetStateVersion().
[DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
[DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
[DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
[DEBUG] [USER] SqlStateMachine->GetState(): devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
[DEBUG] [USER] ASDevice data loaded for user: 'USER'
[DEBUG] [USER] TopCollector initialised with IPC provider 'activesync_ipc_backend'
[DEBUG] [USER] LoopDetection initialised with IPC provider 'activesync_ipc_backend'
[DEBUG] [USER] ZPush::HierarchyCommand(9): true
[DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved device key '476502111': false
[DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name: 'default'
[DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded 'default' policy.
[DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
[DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
[DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
[WBXML] [USER] I  <FolderHierarchy:FolderSync>
[WBXML] [USER] I   <FolderHierarchy:SyncKey>
[WBXML] [USER] I    0
[WBXML] [USER] I   </FolderHierarchy:SyncKey>
[DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
[DEBUG] [USER] ZPush::GetSupportedCommands(): Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
[DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up - Cached objects: 0
[WBXML] [USER] I  </FolderHierarchy:FolderSync>
[DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
[DEBUG] [USER] Initializing folder diff engine
[DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing folder diff engine
[ERROR] [USER] GetFolderList() Error happend in mail No session password available! blocking for 30 seconds for Instance=default, User=USER, Device:android0000000000000
[ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code: 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
[ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
[FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
[DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
[ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB' time='0.16s' devType='Android' devId='android0000000000000' getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603' method='POST' httpcode='503'
[DEBUG] [USER] -------- End


Wo liegt der Fehler, dass die synchronisation nicht klappt?
Konto wurde zuvor neu eingerichtet
Android 5.1.1
Alle Apps aktuell.

VG

 

------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi Beliebig,

Am 11.07.16 um 15:10 schrieb Beliebig:
> Moin.
>
> Hier mal ein kleiner Ausschnitt aus dem activesync Log:​
> /​[DEBUG] [USER] -------- Start
> [DEBUG] [USER] cmd='FolderSync' devType='Android'
> devId='android0000000000000' getUser='USER' from='MY_IP'
> version='EGroupware-16.1.20160603' /

/Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
die aktulle 16.1.20160708 up.
Da wurden inzwischen einige Bugs gefixt.

Ralf

/

> /method='POST'
> [DEBUG] [USER] activesync_backend::__construct() username=USER,
> loose_provisioning=FALSE, autheticated=TRUE
> [DEBUG] [USER] SqlStateMachine(): init
> [DEBUG] [USER] Backend implementation of IStateMachine:
> activesync_statemachine
> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
> [DEBUG] [USER] SqlStateMachine->GetState():
> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
> [DEBUG] [USER] TopCollector initialised with IPC provider
> 'activesync_ipc_backend'
> [DEBUG] [USER] LoopDetection initialised with IPC provider
> 'activesync_ipc_backend'
> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
> device key '476502111': false
> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
> 'default'
> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
> 'default' policy.
> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
> [WBXML] [USER] I  <FolderHierarchy:FolderSync>
> [WBXML] [USER] I   <FolderHierarchy:SyncKey>
> [WBXML] [USER] I    0
> [WBXML] [USER] I   </FolderHierarchy:SyncKey>
> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
> [DEBUG] [USER] ZPush::GetSupportedCommands():
> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
> Cached objects: 0
> [WBXML] [USER] I  </FolderHierarchy:FolderSync>
> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
> [DEBUG] [USER] Initializing folder diff engine
> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
> folder diff engine
> [ERROR] [USER] GetFolderList() Error happend in mail No session
> password available! blocking for 30 seconds for Instance=default,
> User=USER, Device:android0000000000000
> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
> time='0.16s' devType='Android' devId='android0000000000000'
> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
> method='POST' httpcode='503'
> [DEBUG] [USER] -------- End/
>
> Wo liegt der Fehler, dass die synchronisation nicht klappt?
> Konto wurde zuvor neu eingerichtet
> Android 5.1.1
> Alle Apps aktuell.
>
> VG
--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hi

das ist von gestern Abend der master checkout.

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Mon, 11 Jul 2016  
15:24:52 +0200
-------------------------------------------------


> Hi Beliebig,
>
> Am 11.07.16 um 15:10 schrieb Beliebig:
>> Moin.
>>
>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>> /[DEBUG] [USER] -------- Start
>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>> devId='android0000000000000' getUser='USER' from='MY_IP'
>> version='EGroupware-16.1.20160603' /
>
> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
> die aktulle 16.1.20160708 up.
> Da wurden inzwischen einige Bugs gefixt.
>
> Ralf
>
> /
>> /method='POST'
>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>> loose_provisioning=FALSE, autheticated=TRUE
>> [DEBUG] [USER] SqlStateMachine(): init
>> [DEBUG] [USER] Backend implementation of IStateMachine:
>> activesync_statemachine
>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>> [DEBUG] [USER] SqlStateMachine->GetState():
>> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>> [DEBUG] [USER] TopCollector initialised with IPC provider
>> 'activesync_ipc_backend'
>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>> 'activesync_ipc_backend'
>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>> device key '476502111': false
>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>> 'default'
>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>> 'default' policy.
>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>> [WBXML] [USER] I 0
>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>> Cached objects: 0
>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>> [DEBUG] [USER] Initializing folder diff engine
>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>> folder diff engine
>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>> password available! blocking for 30 seconds for Instance=default,
>> User=USER, Device:android0000000000000
>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>> time='0.16s' devType='Android' devId='android0000000000000'
>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>> method='POST' httpcode='503'
>> [DEBUG] [USER] -------- End/
>>
>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>> Konto wurde zuvor neu eingerichtet
>> Android 5.1.1
>> Alle Apps aktuell.
>>
>> VG
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi,

Am 11.07.16 um 15:37 schrieb Beliebig:
> Hi
>
> das ist von gestern Abend der master checkout.

Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:

09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
devId='************************' getUser='user01' from='805892515759'
version='EGroupware-16.1.20160708' method='POST'

Ralf

> VG
>
> ----------------ursprüngliche Nachricht-----------------
> Von: Ralf Becker [[hidden email] ]
> An: [hidden email] Datum: Mon, 11 Jul 2016  
> 15:24:52 +0200
> -------------------------------------------------
>
>
>> Hi Beliebig,
>>
>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>> Moin.
>>>
>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>> /[DEBUG] [USER] -------- Start
>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>> version='EGroupware-16.1.20160603' /
>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>> die aktulle 16.1.20160708 up.
>> Da wurden inzwischen einige Bugs gefixt.
>>
>> Ralf
>>
>> /
>>> /method='POST'
>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>> loose_provisioning=FALSE, autheticated=TRUE
>>> [DEBUG] [USER] SqlStateMachine(): init
>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>> activesync_statemachine
>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>> 'activesync_ipc_backend'
>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>> 'activesync_ipc_backend'
>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>> device key '476502111': false
>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>> 'default'
>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>> 'default' policy.
>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>> [WBXML] [USER] I 0
>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>> Cached objects: 0
>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>> [DEBUG] [USER] Initializing folder diff engine
>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>> folder diff engine
>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>> password available! blocking for 30 seconds for Instance=default,
>>> User=USER, Device:android0000000000000
>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>> time='0.16s' devType='Android' devId='android0000000000000'
>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>> method='POST' httpcode='503'
>>> [DEBUG] [USER] -------- End/
>>>
>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>> Konto wurde zuvor neu eingerichtet
>>> Android 5.1.1
>>> Alle Apps aktuell.
>>>
>>> VG
>> --
>> Ralf Becker
>> Director Software Development
>>
>> Stylite AG
>>
>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>> D-55124 Mainz | Fax. +49 6131 32702-70
>>
>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>
>> Managing Directors: Andre Keller | Gudrun Mueller
>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>
>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>
>>
>>
> __________________________________________________
>> --------------------------------------------------------------------
>> ----------
>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
>> present their vision of the future. This family event has something for
>> everyone, including kids. Get more information and register today.
>> http://sdm.link/attshape
> __________________________________________________
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>
>
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
> _______________________________________________
> egroupware-german mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/egroupware-german

--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hi.

Wo kommt die Version her?

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Mon, 11 Jul 2016  
15:45:48 +0200
-------------------------------------------------


> Hi,
>
> Am 11.07.16 um 15:37 schrieb Beliebig:
>> Hi
>>
>> das ist von gestern Abend der master checkout.
>
> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>
> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
> devId='************************' getUser='user01' from='805892515759'
> version='EGroupware-16.1.20160708' method='POST'
>
> Ralf
>
>> VG
>>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>> 15:24:52 +0200
>> -------------------------------------------------
>>
>>
>>> Hi Beliebig,
>>>
>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>> Moin.
>>>>
>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>> /[DEBUG] [USER] -------- Start
>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>> version='EGroupware-16.1.20160603' /
>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>> die aktulle 16.1.20160708 up.
>>> Da wurden inzwischen einige Bugs gefixt.
>>>
>>> Ralf
>>>
>>> /
>>>> /method='POST'
>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>> activesync_statemachine
>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>> 'activesync_ipc_backend'
>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>> 'activesync_ipc_backend'
>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>> device key '476502111': false
>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>> 'default'
>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>> 'default' policy.
>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>> [WBXML] [USER] I 0
>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>> Cached objects: 0
>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>> [DEBUG] [USER] Initializing folder diff engine
>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>> folder diff engine
>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>> password available! blocking for 30 seconds for Instance=default,
>>>> User=USER, Device:android0000000000000
>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>> method='POST' httpcode='503'
>>>> [DEBUG] [USER] -------- End/
>>>>
>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>> Konto wurde zuvor neu eingerichtet
>>>> Android 5.1.1
>>>> Alle Apps aktuell.
>>>>
>>>> VG
>>> --
>>> Ralf Becker
>>> Director Software Development
>>>
>>> Stylite AG
>>>
>>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>>> D-55124 Mainz | Fax. +49 6131 32702-70
>>>
>>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>>
>>> Managing Directors: Andre Keller | Gudrun Mueller
>>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>>
>>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>>
>>>
>>>
>> __________________________________________________
>>> --------------------------------------------------------------------
>>> ----------
>>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
>>> present their vision of the future. This family event has something for
>>> everyone, including kids. Get more information and register today.
>>> http://sdm.link/attshape
>> __________________________________________________
>>> _______________________________________________
>>> egroupware-german mailing list
>>> [hidden email]  
>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
>> present their vision of the future. This family event has something for
>> everyone, including kids. Get more information and register today.
>> http://sdm.link/attshape
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hi

ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'

rest ist das selbe.

[ERROR] [USER] GetFolderList() Error happend in mail No session  
password available! blocking for 30 seconds for Instance=default,  
User=USER, Device:android0000000000000
[ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:  
503 - file:  
/www/egw/activesync/inc/class.activesync_backend.inc.php:1480
[ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
[FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Mon, 11 Jul 2016  
15:45:48 +0200
-------------------------------------------------


> Hi,
>
> Am 11.07.16 um 15:37 schrieb Beliebig:
>> Hi
>>
>> das ist von gestern Abend der master checkout.
>
> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>
> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
> devId='************************' getUser='user01' from='805892515759'
> version='EGroupware-16.1.20160708' method='POST'
>
> Ralf
>
>> VG
>>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>> 15:24:52 +0200
>> -------------------------------------------------
>>
>>
>>> Hi Beliebig,
>>>
>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>> Moin.
>>>>
>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>> /[DEBUG] [USER] -------- Start
>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>> version='EGroupware-16.1.20160603' /
>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>> die aktulle 16.1.20160708 up.
>>> Da wurden inzwischen einige Bugs gefixt.
>>>
>>> Ralf
>>>
>>> /
>>>> /method='POST'
>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>> activesync_statemachine
>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>> 'activesync_ipc_backend'
>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>> 'activesync_ipc_backend'
>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>> device key '476502111': false
>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>> 'default'
>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>> 'default' policy.
>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>> [WBXML] [USER] I 0
>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>> Cached objects: 0
>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>> [DEBUG] [USER] Initializing folder diff engine
>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>> folder diff engine
>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>> password available! blocking for 30 seconds for Instance=default,
>>>> User=USER, Device:android0000000000000
>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>> method='POST' httpcode='503'
>>>> [DEBUG] [USER] -------- End/
>>>>
>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>> Konto wurde zuvor neu eingerichtet
>>>> Android 5.1.1
>>>> Alle Apps aktuell.
>>>>
>>>> VG
>>> --
>>> Ralf Becker
>>> Director Software Development
>>>
>>> Stylite AG
>>>
>>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>>> D-55124 Mainz | Fax. +49 6131 32702-70
>>>
>>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>>
>>> Managing Directors: Andre Keller | Gudrun Mueller
>>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>>
>>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>>
>>>
>>>
>> __________________________________________________
>>> --------------------------------------------------------------------
>>> ----------
>>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
>>> present their vision of the future. This family event has something for
>>> everyone, including kids. Get more information and register today.
>>> http://sdm.link/attshape
>> __________________________________________________
>>> _______________________________________________
>>> egroupware-german mailing list
>>> [hidden email]  
>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
>> present their vision of the future. This family event has something for
>> everyone, including kids. Get more information and register today.
>> http://sdm.link/attshape
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi,

Am 11.07.16 um 17:45 schrieb Beliebig:
> Hi
>
> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>
> rest ist das selbe.
>
> [ERROR] [USER] GetFolderList() Error happend in mail No session  
> password available! blocking for 30 seconds for Instance=default,  
> User=USER, Device:android0000000000000

Die Exception "No session password available!" kommt wenn das Passwort
des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
Du evtl. ein leeres Passwort?

Ralf

> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:  
> 503 - file:  
> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>
> VG
>
> ----------------ursprüngliche Nachricht-----------------
> Von: Ralf Becker [[hidden email] ]
> An: [hidden email] Datum: Mon, 11 Jul 2016  
> 15:45:48 +0200
> -------------------------------------------------
>
>
>> Hi,
>>
>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>> Hi
>>>
>>> das ist von gestern Abend der master checkout.
>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>
>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>> devId='************************' getUser='user01' from='805892515759'
>> version='EGroupware-16.1.20160708' method='POST'
>>
>> Ralf
>>
>>> VG
>>>
>>> ----------------ursprüngliche Nachricht-----------------
>>> Von: Ralf Becker [[hidden email] ]
>>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>>> 15:24:52 +0200
>>> -------------------------------------------------
>>>
>>>
>>>> Hi Beliebig,
>>>>
>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>> Moin.
>>>>>
>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>> /[DEBUG] [USER] -------- Start
>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>> version='EGroupware-16.1.20160603' /
>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>> die aktulle 16.1.20160708 up.
>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>
>>>> Ralf
>>>>
>>>> /
>>>>> /method='POST'
>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>> activesync_statemachine
>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting version '2'
>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>> devid:'android0000000000000' type:'devicedata' key:'null' counter:'false'
>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>> 'activesync_ipc_backend'
>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>> 'activesync_ipc_backend'
>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>> device key '476502111': false
>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>> 'default'
>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>> 'default' policy.
>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>> [WBXML] [USER] I 0
>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>> Cached objects: 0
>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>> folder diff engine
>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>> User=USER, Device:android0000000000000
>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>> 503 - file: /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>> method='POST' httpcode='503'
>>>>> [DEBUG] [USER] -------- End/
>>>>>
>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>> Konto wurde zuvor neu eingerichtet
>>>>> Android 5.1.1
>>>>> Alle Apps aktuell.
>>>>>
>>>>> VG
--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
  Hi.

Nein, habe sowohl für jedes eingetragene Mailkonto ein Passwort, sowie  
für die egw Anmeldung

Vg

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Tue, 12 Jul 2016  
08:21:41 +0200
-------------------------------------------------


> Hi,
>
> Am 11.07.16 um 17:45 schrieb Beliebig:
>> Hi
>>
>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>
>> rest ist das selbe.
>>
>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>> password available! blocking for 30 seconds for Instance=default,  
>> User=USER, Device:android0000000000000
>
> Die Exception "No session password available!" kommt wenn das Passwort
> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
> Du evtl. ein leeres Passwort?
>
> Ralf
>
>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:  
>> 503 - file:  
>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>
>> VG
>>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>> 15:45:48 +0200
>> -------------------------------------------------
>>
>>
>>> Hi,
>>>
>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>> Hi
>>>>
>>>> das ist von gestern Abend der master checkout.
>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>
>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>> devId='************************' getUser='user01' from='805892515759'
>>> version='EGroupware-16.1.20160708' method='POST'
>>>
>>> Ralf
>>>
>>>> VG
>>>>
>>>> ----------------ursprüngliche Nachricht-----------------
>>>> Von: Ralf Becker [[hidden email] ]
>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>> 2016 15:24:52 +0200
>>>> -------------------------------------------------
>>>>
>>>>
>>>>> Hi Beliebig,
>>>>>
>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>> Moin.
>>>>>>
>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>> /[DEBUG] [USER] -------- Start
>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>> version='EGroupware-16.1.20160603' /
>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>> die aktulle 16.1.20160708 up.
>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>
>>>>> Ralf
>>>>>
>>>>> /
>>>>>> /method='POST'
>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>> activesync_statemachine
>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>> version '2'
>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>> counter:'false'
>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>> 'activesync_ipc_backend'
>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>> 'activesync_ipc_backend'
>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>> device key '476502111': false
>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>> 'default'
>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>> 'default' policy.
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>> [WBXML] [USER] I 0
>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>> Cached objects: 0
>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>> folder diff engine
>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>> User=USER, Device:android0000000000000
>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>> 503 - file:  
>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>> Unavailable
>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>> method='POST' httpcode='503'
>>>>>> [DEBUG] [USER] -------- End/
>>>>>>
>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>> Android 5.1.1
>>>>>> Alle Apps aktuell.
>>>>>>
>>>>>> VG
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and  
> protocols are consuming the most bandwidth. Provides multi-vendor  
> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
> decisions using capacity planning
> reports.http://sdm.link/zohodev2dev

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hm, ok.

Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Tue, 12 Jul 2016  
08:21:41 +0200
-------------------------------------------------


> Hi,
>
> Am 11.07.16 um 17:45 schrieb Beliebig:
>> Hi
>>
>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>
>> rest ist das selbe.
>>
>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>> password available! blocking for 30 seconds for Instance=default,  
>> User=USER, Device:android0000000000000
>
> Die Exception "No session password available!" kommt wenn das Passwort
> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
> Du evtl. ein leeres Passwort?
>
> Ralf
>
>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:  
>> 503 - file:  
>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>
>> VG
>>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>> 15:45:48 +0200
>> -------------------------------------------------
>>
>>
>>> Hi,
>>>
>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>> Hi
>>>>
>>>> das ist von gestern Abend der master checkout.
>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>
>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>> devId='************************' getUser='user01' from='805892515759'
>>> version='EGroupware-16.1.20160708' method='POST'
>>>
>>> Ralf
>>>
>>>> VG
>>>>
>>>> ----------------ursprüngliche Nachricht-----------------
>>>> Von: Ralf Becker [[hidden email] ]
>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>> 2016 15:24:52 +0200
>>>> -------------------------------------------------
>>>>
>>>>
>>>>> Hi Beliebig,
>>>>>
>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>> Moin.
>>>>>>
>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>> /[DEBUG] [USER] -------- Start
>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>> version='EGroupware-16.1.20160603' /
>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>> die aktulle 16.1.20160708 up.
>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>
>>>>> Ralf
>>>>>
>>>>> /
>>>>>> /method='POST'
>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>> activesync_statemachine
>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>> version '2'
>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>> counter:'false'
>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>> 'activesync_ipc_backend'
>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>> 'activesync_ipc_backend'
>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>> device key '476502111': false
>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>> 'default'
>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>> 'default' policy.
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>> [WBXML] [USER] I 0
>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>> Cached objects: 0
>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>> folder diff engine
>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>> User=USER, Device:android0000000000000
>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>> 503 - file:  
>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>> Unavailable
>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>> method='POST' httpcode='503'
>>>>>> [DEBUG] [USER] -------- End/
>>>>>>
>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>> Android 5.1.1
>>>>>> Alle Apps aktuell.
>>>>>>
>>>>>> VG
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and  
> protocols are consuming the most bandwidth. Provides multi-vendor  
> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
> decisions using capacity planning
> reports.http://sdm.link/zohodev2dev

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi,

Am 13.07.16 um 18:23 schrieb Beliebig:
> Hm, ok.
>
> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?

Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
Viewer angeschaut werden oder auf dem Server in EGroupware Files
Verzeichnis unter activesync/$device_id.log.

In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
OpenSSL PHP Extension verfügbar ist von hier:

   
https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Credentials.php#L572

sonst für Mcrypt von:

   
https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Credentials.php#L746

Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
Session:

   
https://github.com/EGroupware/egroupware/blob/master/api/src/Session.php#L558

Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
funktioniert.

Ralf

> ----------------ursprüngliche Nachricht-----------------
> Von: Ralf Becker [[hidden email] ]
> An: [hidden email] Datum: Tue, 12 Jul 2016  
> 08:21:41 +0200
> -------------------------------------------------
>
>
>> Hi,
>>
>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>> Hi
>>>
>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>
>>> rest ist das selbe.
>>>
>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>> password available! blocking for 30 seconds for Instance=default,  
>>> User=USER, Device:android0000000000000
>> Die Exception "No session password available!" kommt wenn das Passwort
>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>> Du evtl. ein leeres Passwort?
>>
>> Ralf
>>
>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:  
>>> 503 - file:  
>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>
>>> VG
>>>
>>> ----------------ursprüngliche Nachricht-----------------
>>> Von: Ralf Becker [[hidden email] ]
>>> An: [hidden email] Datum: Mon, 11 Jul 2016  
>>> 15:45:48 +0200
>>> -------------------------------------------------
>>>
>>>
>>>> Hi,
>>>>
>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>> Hi
>>>>>
>>>>> das ist von gestern Abend der master checkout.
>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>
>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>>> devId='************************' getUser='user01' from='805892515759'
>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>
>>>> Ralf
>>>>
>>>>> VG
>>>>>
>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>> Von: Ralf Becker [[hidden email] ]
>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>> 2016 15:24:52 +0200
>>>>> -------------------------------------------------
>>>>>
>>>>>
>>>>>> Hi Beliebig,
>>>>>>
>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>> Moin.
>>>>>>>
>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>>> die aktulle 16.1.20160708 up.
>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>
>>>>>> Ralf
>>>>>>
>>>>>> /
>>>>>>> /method='POST'
>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>> activesync_statemachine
>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>>> version '2'
>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>> counter:'false'
>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>> 'activesync_ipc_backend'
>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>> 'activesync_ipc_backend'
>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>> device key '476502111': false
>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>>> 'default'
>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>> 'default' policy.
>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>> [WBXML] [USER] I 0
>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>> Cached objects: 0
>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>> folder diff engine
>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>> User=USER, Device:android0000000000000
>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>> 503 - file:  
>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>>> Unavailable
>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>> method='POST' httpcode='503'
>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>
>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>> Android 5.1.1
>>>>>>> Alle Apps aktuell.
>>>>>>>
>>>>>>> VG
>> --
>> Ralf Becker
>> Director Software Development
>>
>> Stylite AG
>>
>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>> D-55124 Mainz | Fax. +49 6131 32702-70
>>
>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>
>> Managing Directors: Andre Keller | Gudrun Mueller
>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>
>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>
>>
>>
> __________________________________________________
>> --------------------------------------------------------------------
>> ----------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
>> patterns at an interface-level. Reveals which users, apps, and  
>> protocols are consuming the most bandwidth. Provides multi-vendor  
>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>> decisions using capacity planning
>> reports.http://sdm.link/zohodev2dev
> __________________________________________________
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>
>
>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity planning
> reports.http://sdm.link/zohodev2dev
> _______________________________________________
> egroupware-german mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/egroupware-german

--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hallo

Denke, ich konnte es ein wenig eingrenzen.
Es liegt wohl an EGroupware\Api\Mail\Account::get_default

Und zwar:
Ich habe meine default mailadresse [hidden email], die mit meinem Account  
verknüpft ist und auch bei activesync als default angegeben ist.
Dann habe ich noch ein paar weiter mailadressen zu mail hinzugefügt,  
auch eine gmail, welche in der Mailapp bis oben steht (weiss nicht, ob  
es etwas damit zu tun hat).

Jetzt habe ich mir mal aus EGroupware\Api\Mail\Account::get_default ->  
aus dem foreach die Variablen ausgeben lassen und es kommt nur das  
gmail konto raus, was _nicht_ mein default Konto ist.
Und dort kommt auch:
EGroupware\Api\Mail\Account::get_default1527 Error no Default  
available.No session password available!

Nur warum er _nur_ das gmail Konto nimmt, k.A.

Evtl. weitere Hinweise, wo man suchen kann?

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Thu, 14 Jul 2016  
08:27:57 +0200
-------------------------------------------------


> Hi,
>
> Am 13.07.16 um 18:23 schrieb Beliebig:
>> Hm, ok.
>>
>> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?
>
> Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
> eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
> Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
> Viewer angeschaut werden oder auf dem Server in EGroupware Files
> Verzeichnis unter activesync/$device_id.log.
>
> In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
> OpenSSL PHP Extension verfügbar ist von hier:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
> edentials.php#L572
>
> sonst für Mcrypt von:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
> edentials.php#L746
>
> Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
> Session:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Session
> .php#L558
>
> Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
> Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
> funktioniert.
>
> Ralf
>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Tue, 12 Jul 2016  
>> 08:21:41 +0200
>> -------------------------------------------------
>>
>>
>>> Hi,
>>>
>>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>>> Hi
>>>>
>>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>>
>>>> rest ist das selbe.
>>>>
>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>>> password available! blocking for 30 seconds for Instance=default,  
>>>> User=USER, Device:android0000000000000
>>> Die Exception "No session password available!" kommt wenn das Passwort
>>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>>> Du evtl. ein leeres Passwort?
>>>
>>> Ralf
>>>
>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable -  
>>>> code: 503 - file:  
>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>>
>>>> VG
>>>>
>>>> ----------------ursprüngliche Nachricht-----------------
>>>> Von: Ralf Becker [[hidden email] ]
>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>> 2016 15:45:48 +0200
>>>> -------------------------------------------------
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>>> Hi
>>>>>>
>>>>>> das ist von gestern Abend der master checkout.
>>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>>
>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>>>> devId='************************' getUser='user01' from='805892515759'
>>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>>
>>>>> Ralf
>>>>>
>>>>>> VG
>>>>>>
>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>>> 2016 15:24:52 +0200
>>>>>> -------------------------------------------------
>>>>>>
>>>>>>
>>>>>>> Hi Beliebig,
>>>>>>>
>>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>>> Moin.
>>>>>>>>
>>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>>>> die aktulle 16.1.20160708 up.
>>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>>
>>>>>>> Ralf
>>>>>>>
>>>>>>> /
>>>>>>>> /method='POST'
>>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>>> activesync_statemachine
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>>>> version '2'
>>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>>> counter:'false'
>>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>>> 'activesync_ipc_backend'
>>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>>> 'activesync_ipc_backend'
>>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>>> device key '476502111': false
>>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>>>> 'default'
>>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>>> 'default' policy.
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>>> [WBXML] [USER] I 0
>>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>>> Cached objects: 0
>>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>>> folder diff engine
>>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>>> User=USER, Device:android0000000000000
>>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>>> 503 - file:  
>>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>>>> Unavailable
>>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>>> method='POST' httpcode='503'
>>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>>
>>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>>> Android 5.1.1
>>>>>>>> Alle Apps aktuell.
>>>>>>>>
>>>>>>>> VG
>>> --
>>> Ralf Becker
>>> Director Software Development
>>>
>>> Stylite AG
>>>
>>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>>> D-55124 Mainz | Fax. +49 6131 32702-70
>>>
>>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>>
>>> Managing Directors: Andre Keller | Gudrun Mueller
>>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>>
>>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>>
>>>
>>>
>> __________________________________________________
>>> --------------------------------------------------------------------
>>> ----------
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth  
>>> and traffic
>>> patterns at an interface-level. Reveals which users, apps, and  
>>> protocols are consuming the most bandwidth. Provides multi-vendor  
>>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>>> decisions using capacity planning
>>> reports.http://sdm.link/zohodev2dev
>> __________________________________________________
>>> _______________________________________________
>>> egroupware-german mailing list
>>> [hidden email]  
>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
>> patterns at an interface-level. Reveals which users, apps, and  
>> protocols are consuming the most bandwidth. Provides multi-vendor  
>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>> decisions using capacity planning
>> reports.http://sdm.link/zohodev2dev
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and  
> protocols are consuming the most bandwidth. Provides multi-vendor  
> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
> decisions using capacity planning
> reports.http://sdm.link/zohodev2dev

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi,

Am 14.07.16 um 15:07 schrieb Beliebig:

> Hallo
>
> Denke, ich konnte es ein wenig eingrenzen.
> Es liegt wohl an EGroupware\Api\Mail\Account::get_default
>
> Und zwar:
> Ich habe meine default mailadresse [hidden email], die mit meinem Account  
> verknüpft ist und auch bei activesync als default angegeben ist.
> Dann habe ich noch ein paar weiter mailadressen zu mail hinzugefügt,  
> auch eine gmail, welche in der Mailapp bis oben steht (weiss nicht, ob  
> es etwas damit zu tun hat).
>
> Jetzt habe ich mir mal aus EGroupware\Api\Mail\Account::get_default ->  
> aus dem foreach die Variablen ausgeben lassen und es kommt nur das  
> gmail konto raus, was _nicht_ mein default Konto ist.
> Und dort kommt auch:
> EGroupware\Api\Mail\Account::get_default1527 Error no Default  
> available.No session password available!
>
> Nur warum er _nur_ das gmail Konto nimmt, k.A.
Du kannst ja das für eSync verwendete Mail Konto in Deinen Einstellungen
festlegen.

Ralf

> Evtl. weitere Hinweise, wo man suchen kann?
>
> VG
>
> ----------------ursprüngliche Nachricht-----------------
> Von: Ralf Becker [[hidden email] ]
> An: [hidden email] Datum: Thu, 14 Jul 2016  
> 08:27:57 +0200
> -------------------------------------------------
>
>
>> Hi,
>>
>> Am 13.07.16 um 18:23 schrieb Beliebig:
>>> Hm, ok.
>>>
>>> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?
>> Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
>> eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
>> Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
>> Viewer angeschaut werden oder auf dem Server in EGroupware Files
>> Verzeichnis unter activesync/$device_id.log.
>>
>> In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
>> OpenSSL PHP Extension verfügbar ist von hier:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>> edentials.php#L572
>>
>> sonst für Mcrypt von:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>> edentials.php#L746
>>
>> Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
>> Session:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Session
>> .php#L558
>>
>> Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
>> Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
>> funktioniert.
>>
>> Ralf
>>
>>> ----------------ursprüngliche Nachricht-----------------
>>> Von: Ralf Becker [[hidden email] ]
>>> An: [hidden email] Datum: Tue, 12 Jul 2016  
>>> 08:21:41 +0200
>>> -------------------------------------------------
>>>
>>>
>>>> Hi,
>>>>
>>>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>>>> Hi
>>>>>
>>>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>>>
>>>>> rest ist das selbe.
>>>>>
>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>>>> password available! blocking for 30 seconds for Instance=default,  
>>>>> User=USER, Device:android0000000000000
>>>> Die Exception "No session password available!" kommt wenn das Passwort
>>>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>>>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>>>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>>>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>>>> Du evtl. ein leeres Passwort?
>>>>
>>>> Ralf
>>>>
>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable -  
>>>>> code: 503 - file:  
>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>>>
>>>>> VG
>>>>>
>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>> Von: Ralf Becker [[hidden email] ]
>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>> 2016 15:45:48 +0200
>>>>> -------------------------------------------------
>>>>>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>>>> Hi
>>>>>>>
>>>>>>> das ist von gestern Abend der master checkout.
>>>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>>>
>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>>>>> devId='************************' getUser='user01' from='805892515759'
>>>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>>>
>>>>>> Ralf
>>>>>>
>>>>>>> VG
>>>>>>>
>>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>>>> 2016 15:24:52 +0200
>>>>>>> -------------------------------------------------
>>>>>>>
>>>>>>>
>>>>>>>> Hi Beliebig,
>>>>>>>>
>>>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>>>> Moin.
>>>>>>>>>
>>>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>>>>> die aktulle 16.1.20160708 up.
>>>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>>>
>>>>>>>> Ralf
>>>>>>>>
>>>>>>>> /
>>>>>>>>> /method='POST'
>>>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>>>> activesync_statemachine
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>>>>> version '2'
>>>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>>>> counter:'false'
>>>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>>>> device key '476502111': false
>>>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>>>>> 'default'
>>>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>>>> 'default' policy.
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>>>> [WBXML] [USER] I 0
>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>>>> Cached objects: 0
>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>>>> folder diff engine
>>>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>>>> User=USER, Device:android0000000000000
>>>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>>>> 503 - file:  
>>>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>>>>> Unavailable
>>>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>>>> method='POST' httpcode='503'
>>>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>>>
>>>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>>>> Android 5.1.1
>>>>>>>>> Alle Apps aktuell.
>>>>>>>>>
>>>>>>>>> VG
--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Hi

>> Ich habe meine default mailadresse [hidden email], die mit meinem  
>> Account verknüpft ist und auch bei activesync als default angegeben  
>> ist.

also NICHT die gmail Adresse.

Nur warum nimmt er nur die gmail Adresse?

VG

----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Thu, 14 Jul 2016  
15:47:41 +0200
-------------------------------------------------


> Hi,
>
> Am 14.07.16 um 15:07 schrieb Beliebig:
>> Hallo
>>
>> Denke, ich konnte es ein wenig eingrenzen.
>> Es liegt wohl an EGroupware\Api\Mail\Account::get_default
>>
>> Und zwar:
>> Ich habe meine default mailadresse [hidden email], die mit meinem  
>> Account verknüpft ist und auch bei activesync als default angegeben  
>> ist.
>> Dann habe ich noch ein paar weiter mailadressen zu mail  
>> hinzugefügt, auch eine gmail, welche in der Mailapp bis oben steht  
>> (weiss nicht, ob es etwas damit zu tun hat).
>>
>> Jetzt habe ich mir mal aus EGroupware\Api\Mail\Account::get_default  
>> -> aus dem foreach die Variablen ausgeben lassen und es kommt nur  
>> das gmail konto raus, was _nicht_ mein default Konto ist.
>> Und dort kommt auch:
>> EGroupware\Api\Mail\Account::get_default1527 Error no Default  
>> available.No session password available!
>>
>> Nur warum er _nur_ das gmail Konto nimmt, k.A.
>
> Du kannst ja das für eSync verwendete Mail Konto in Deinen Einstellungen
> festlegen.
>
> Ralf
>
>> Evtl. weitere Hinweise, wo man suchen kann?
>>
>> VG
>>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Thu, 14 Jul 2016  
>> 08:27:57 +0200
>> -------------------------------------------------
>>
>>
>>> Hi,
>>>
>>> Am 13.07.16 um 18:23 schrieb Beliebig:
>>>> Hm, ok.
>>>>
>>>> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?
>>> Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
>>> eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
>>> Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
>>> Viewer angeschaut werden oder auf dem Server in EGroupware Files
>>> Verzeichnis unter activesync/$device_id.log.
>>>
>>> In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
>>> OpenSSL PHP Extension verfügbar ist von hier:
>>>
>>>
>>>
>>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>>> edentials.php#L572
>>>
>>> sonst für Mcrypt von:
>>>
>>>
>>>
>>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>>> edentials.php#L746
>>>
>>> Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
>>> Session:
>>>
>>>
>>>
>>> https://github.com/EGroupware/egroupware/blob/master/api/src/Session
>>> .php#L558
>>>
>>> Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
>>> Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
>>> funktioniert.
>>>
>>> Ralf
>>>
>>>> ----------------ursprüngliche Nachricht-----------------
>>>> Von: Ralf Becker [[hidden email] ]
>>>> An: [hidden email] Datum: Tue, 12 Jul  
>>>> 2016 08:21:41 +0200
>>>> -------------------------------------------------
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>>>>> Hi
>>>>>>
>>>>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>>>>
>>>>>> rest ist das selbe.
>>>>>>
>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>>>>> password available! blocking for 30 seconds for  
>>>>>> Instance=default, User=USER, Device:android0000000000000
>>>>> Die Exception "No session password available!" kommt wenn das Passwort
>>>>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>>>>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>>>>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>>>>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>>>>> Du evtl. ein leeres Passwort?
>>>>>
>>>>> Ralf
>>>>>
>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable -  
>>>>>> code: 503 - file:  
>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>> Unavailable
>>>>>>
>>>>>> VG
>>>>>>
>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>>> 2016 15:45:48 +0200
>>>>>> -------------------------------------------------
>>>>>>
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>>>>> Hi
>>>>>>>>
>>>>>>>> das ist von gestern Abend der master checkout.
>>>>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>>>>
>>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping'  
>>>>>>> devType='iPhone'
>>>>>>> devId='************************' getUser='user01' from='805892515759'
>>>>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>>>>
>>>>>>> Ralf
>>>>>>>
>>>>>>>> VG
>>>>>>>>
>>>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>>>> An: [hidden email] Datum: Mon, 11  
>>>>>>>> Jul 2016 15:24:52 +0200
>>>>>>>> -------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hi Beliebig,
>>>>>>>>>
>>>>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>>>>> Moin.
>>>>>>>>>>
>>>>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs,  
>>>>>>>>> date mal auf
>>>>>>>>> die aktulle 16.1.20160708 up.
>>>>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>>>>
>>>>>>>>> Ralf
>>>>>>>>>
>>>>>>>>> /
>>>>>>>>>> /method='POST'
>>>>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>>>>> activesync_statemachine
>>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion():  
>>>>>>>>>> supporting version '2'
>>>>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>>>>> counter:'false'
>>>>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>>>>> [DEBUG] [USER]  
>>>>>>>>>> DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>>>>> device key '476502111': false
>>>>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined  
>>>>>>>>>> policy name:
>>>>>>>>>> 'default'
>>>>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>>>>> 'default' policy.
>>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...)  
>>>>>>>>>> logon SUCCESS
>>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>>>>> [WBXML] [USER] I 0
>>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>>>>> Cached objects: 0
>>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>>>>> folder diff engine
>>>>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>>>>> User=USER, Device:android0000000000000
>>>>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>>>>> 503 - file:  
>>>>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) -  
>>>>>>>>>> Service Unavailable
>>>>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>>>>> method='POST' httpcode='503'
>>>>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>>>>
>>>>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>>>>> Android 5.1.1
>>>>>>>>>> Alle Apps aktuell.
>>>>>>>>>>
>>>>>>>>>> VG
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and  
> protocols are consuming the most bandwidth. Provides multi-vendor  
> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
> decisions using capacity planning
> reports.http://sdm.link/zohodev2dev

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Beliebig Beliebig
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

In reply to this post by Beliebig
Moin mal wieder.

Habe mich mal wieder dran gesetzt und das Ergebnis ist:
1. neuen Account erstellt, nur die Account Mailadresse -> sync funktioniert
2. neues Mailkonto hinzugefügt -> sync funktioniert nicht mehr, trotz  
esync Einstellung -> primäres Profil
3. das erstellte Mailkonto gelöscht -> sync funktioniert nicht :/

Android 6

Fehlermeldung bleibt die selbe -> no session PW
also scheint egw irgend ein Problem mit mehreren Mailkonten pro  
Account zu haben.
Die Fehlermeldung wird in Mail\Accounts geworfen

habe mir auch jeweils die get_default -> params ausgeben lassen, als  
sync funktionierte, von beiden Konten, sieht soweit gleich aus.

Was ist die vorhergehende Funktion zu Account get_default(...)?

VG


----------------ursprüngliche Nachricht-----------------
Von: Ralf Becker [[hidden email] ]
An: [hidden email] Datum: Thu, 14 Jul 2016  
08:27:57 +0200
-------------------------------------------------


> Hi,
>
> Am 13.07.16 um 18:23 schrieb Beliebig:
>> Hm, ok.
>>
>> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?
>
> Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
> eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
> Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
> Viewer angeschaut werden oder auf dem Server in EGroupware Files
> Verzeichnis unter activesync/$device_id.log.
>
> In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
> OpenSSL PHP Extension verfügbar ist von hier:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
> edentials.php#L572
>
> sonst für Mcrypt von:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
> edentials.php#L746
>
> Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
> Session:
>
>
>
> https://github.com/EGroupware/egroupware/blob/master/api/src/Session
> .php#L558
>
> Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
> Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
> funktioniert.
>
> Ralf
>
>> ----------------ursprüngliche Nachricht-----------------
>> Von: Ralf Becker [[hidden email] ]
>> An: [hidden email] Datum: Tue, 12 Jul 2016  
>> 08:21:41 +0200
>> -------------------------------------------------
>>
>>
>>> Hi,
>>>
>>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>>> Hi
>>>>
>>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>>
>>>> rest ist das selbe.
>>>>
>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>>> password available! blocking for 30 seconds for Instance=default,  
>>>> User=USER, Device:android0000000000000
>>> Die Exception "No session password available!" kommt wenn das Passwort
>>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>>> Du evtl. ein leeres Passwort?
>>>
>>> Ralf
>>>
>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable -  
>>>> code: 503 - file:  
>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>>
>>>> VG
>>>>
>>>> ----------------ursprüngliche Nachricht-----------------
>>>> Von: Ralf Becker [[hidden email] ]
>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>> 2016 15:45:48 +0200
>>>> -------------------------------------------------
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>>> Hi
>>>>>>
>>>>>> das ist von gestern Abend der master checkout.
>>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>>
>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>>>> devId='************************' getUser='user01' from='805892515759'
>>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>>
>>>>> Ralf
>>>>>
>>>>>> VG
>>>>>>
>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>>> 2016 15:24:52 +0200
>>>>>> -------------------------------------------------
>>>>>>
>>>>>>
>>>>>>> Hi Beliebig,
>>>>>>>
>>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>>> Moin.
>>>>>>>>
>>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>>>> die aktulle 16.1.20160708 up.
>>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>>
>>>>>>> Ralf
>>>>>>>
>>>>>>> /
>>>>>>>> /method='POST'
>>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>>> activesync_statemachine
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>>>> version '2'
>>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>>> counter:'false'
>>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>>> 'activesync_ipc_backend'
>>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>>> 'activesync_ipc_backend'
>>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>>> device key '476502111': false
>>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>>>> 'default'
>>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>>> 'default' policy.
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>>> [WBXML] [USER] I 0
>>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>>> Cached objects: 0
>>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>>> folder diff engine
>>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>>> User=USER, Device:android0000000000000
>>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>>> 503 - file:  
>>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>>>> Unavailable
>>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>>> method='POST' httpcode='503'
>>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>>
>>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>>> Android 5.1.1
>>>>>>>> Alle Apps aktuell.
>>>>>>>>
>>>>>>>> VG
>>> --
>>> Ralf Becker
>>> Director Software Development
>>>
>>> Stylite AG
>>>
>>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>>> D-55124 Mainz | Fax. +49 6131 32702-70
>>>
>>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>>
>>> Managing Directors: Andre Keller | Gudrun Mueller
>>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>>
>>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>>
>>>
>>>
>> __________________________________________________
>>> --------------------------------------------------------------------
>>> ----------
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth  
>>> and traffic
>>> patterns at an interface-level. Reveals which users, apps, and  
>>> protocols are consuming the most bandwidth. Provides multi-vendor  
>>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>>> decisions using capacity planning
>>> reports.http://sdm.link/zohodev2dev
>> __________________________________________________
>>> _______________________________________________
>>> egroupware-german mailing list
>>> [hidden email]  
>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
>> patterns at an interface-level. Reveals which users, apps, and  
>> protocols are consuming the most bandwidth. Provides multi-vendor  
>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>> decisions using capacity planning
>> reports.http://sdm.link/zohodev2dev
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>
>
> --
> Ralf Becker
> Director Software Development
>
> Stylite AG
>
> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
> D-55124 Mainz | Fax. +49 6131 32702-70
>
> Email: [hidden email] www.stylite.de | www.egroupware.org
>
> Managing Directors: Andre Keller | Gudrun Mueller
> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>
> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>
>
>

__________________________________________________
>
> --------------------------------------------------------------------
> ----------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and  
> protocols are consuming the most bandwidth. Provides multi-vendor  
> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
> decisions using capacity planning
> reports.http://sdm.link/zohodev2dev

__________________________________________________
> _______________________________________________
> egroupware-german mailing list
> [hidden email]  
> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>





------------------------------------------------------------------------------
_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german
Ralf Becker Stylite AG Ralf Becker Stylite AG
Reply | Threaded
Open this post in threaded view
|

Re: ActiveSync synct nicht

Hi,

mir ist nicht klar wie es bei Dir und nur bei Dir zu dem Verlust des
Passworts aus der Sitzung kommt.

Es gibt jetzt nur zwei Möglichkeiten:
a) du debugst das selber, ich hab' dir die relevanten Stellen im Code ja
schon in meiner letzten Mail geschrieben oder
b) du kaufst bei uns ein Support Budget und gibst uns Zugang zu der
Maschine, dann können wir es debuggen

Ralf

Am 04.08.16 um 13:05 schrieb Beliebig:

> Moin mal wieder.
>
> Habe mich mal wieder dran gesetzt und das Ergebnis ist:
> 1. neuen Account erstellt, nur die Account Mailadresse -> sync funktioniert
> 2. neues Mailkonto hinzugefügt -> sync funktioniert nicht mehr, trotz  
> esync Einstellung -> primäres Profil
> 3. das erstellte Mailkonto gelöscht -> sync funktioniert nicht :/
>
> Android 6
>
> Fehlermeldung bleibt die selbe -> no session PW
> also scheint egw irgend ein Problem mit mehreren Mailkonten pro  
> Account zu haben.
> Die Fehlermeldung wird in Mail\Accounts geworfen
>
> habe mir auch jeweils die get_default -> params ausgeben lassen, als  
> sync funktionierte, von beiden Konten, sieht soweit gleich aus.
>
> Was ist die vorhergehende Funktion zu Account get_default(...)?
>
> VG
>
>
> ----------------ursprüngliche Nachricht-----------------
> Von: Ralf Becker [[hidden email] ]
> An: [hidden email] Datum: Thu, 14 Jul 2016  
> 08:27:57 +0200
> -------------------------------------------------
>
>
>> Hi,
>>
>> Am 13.07.16 um 18:23 schrieb Beliebig:
>>> Hm, ok.
>>>
>>> Wo würde sich denn, bei diesem Problem, das Debuggen anfangen zu lohnen?
>> Also z-push selbst schreibt ein sehr ausführliches Log, wenn man in den
>> eSync Einstellungen im Tab Wartung unter "Logging einschalten" "Alle
>> Ihre Geräte" auswählt. Das Log kann dann durch den dort eingebauten
>> Viewer angeschaut werden oder auf dem Server in EGroupware Files
>> Verzeichnis unter activesync/$device_id.log.
>>
>> In dem Fall hilft es aber nicht viel, die Exception kommt wenn die
>> OpenSSL PHP Extension verfügbar ist von hier:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>> edentials.php#L572
>>
>> sonst für Mcrypt von:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Mail/Cr
>> edentials.php#L746
>>
>> Die Session Klasse schreibt das Passwort beim Anlegen der Sitzung in die
>> Session:
>>
>>
>>
>> https://github.com/EGroupware/egroupware/blob/master/api/src/Session
>> .php#L558
>>
>> Das erstaunliche ist, das die EGroupware Mail App genau den gleichen
>> Code sprich das gleiche Verfahren benutzt und es dort ja auch bei Dir
>> funktioniert.
>>
>> Ralf
>>
>>> ----------------ursprüngliche Nachricht-----------------
>>> Von: Ralf Becker [[hidden email] ]
>>> An: [hidden email] Datum: Tue, 12 Jul 2016  
>>> 08:21:41 +0200
>>> -------------------------------------------------
>>>
>>>
>>>> Hi,
>>>>
>>>> Am 11.07.16 um 17:45 schrieb Beliebig:
>>>>> Hi
>>>>>
>>>>> ok, habe jetzt version='EGroupware-16.1.20160708' method='POST'
>>>>>
>>>>> rest ist das selbe.
>>>>>
>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session  
>>>>> password available! blocking for 30 seconds for Instance=default,  
>>>>> User=USER, Device:android0000000000000
>>>> Die Exception "No session password available!" kommt wenn das Passwort
>>>> des Mailkontos mit dem Passwort des Benutzers verschlüsselt ist und das
>>>> in der aktuellen Sitzung nicht vorliegt. Gründe könnten ein
>>>> passwortloses Loginverfahren with NTLM oder Zertificate sein. Ich wüßte
>>>> allerdings nicht, das wir sowas mit ActiveSync unterstützen. Oder hast
>>>> Du evtl. ein leeres Passwort?
>>>>
>>>> Ralf
>>>>
>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable -  
>>>>> code: 503 - file:  
>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service Unavailable
>>>>>
>>>>> VG
>>>>>
>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>> Von: Ralf Becker [[hidden email] ]
>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>> 2016 15:45:48 +0200
>>>>> -------------------------------------------------
>>>>>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Am 11.07.16 um 15:37 schrieb Beliebig:
>>>>>>> Hi
>>>>>>>
>>>>>>> das ist von gestern Abend der master checkout.
>>>>>> Dann hast Du da was falsch gemacht, so sieht es bei mir im Log aus:
>>>>>>
>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] -------- Start
>>>>>> 09/07/2016 09:32:54 [19857] [DEBUG] [user01] cmd='Ping' devType='iPhone'
>>>>>> devId='************************' getUser='user01' from='805892515759'
>>>>>> version='EGroupware-16.1.20160708' method='POST'
>>>>>>
>>>>>> Ralf
>>>>>>
>>>>>>> VG
>>>>>>>
>>>>>>> ----------------ursprüngliche Nachricht-----------------
>>>>>>> Von: Ralf Becker [[hidden email] ]
>>>>>>> An: [hidden email] Datum: Mon, 11 Jul  
>>>>>>> 2016 15:24:52 +0200
>>>>>>> -------------------------------------------------
>>>>>>>
>>>>>>>
>>>>>>>> Hi Beliebig,
>>>>>>>>
>>>>>>>> Am 11.07.16 um 15:10 schrieb Beliebig:
>>>>>>>>> Moin.
>>>>>>>>>
>>>>>>>>> Hier mal ein kleiner Ausschnitt aus dem activesync Log:
>>>>>>>>> /[DEBUG] [USER] -------- Start
>>>>>>>>> [DEBUG] [USER] cmd='FolderSync' devType='Android'
>>>>>>>>> devId='android0000000000000' getUser='USER' from='MY_IP'
>>>>>>>>> version='EGroupware-16.1.20160603' /
>>>>>>>> /Das ist eine schon ziemlich alte 16.1, war einer der RCs, date mal auf
>>>>>>>> die aktulle 16.1.20160708 up.
>>>>>>>> Da wurden inzwischen einige Bugs gefixt.
>>>>>>>>
>>>>>>>> Ralf
>>>>>>>>
>>>>>>>> /
>>>>>>>>> /method='POST'
>>>>>>>>> [DEBUG] [USER] activesync_backend::__construct() username=USER,
>>>>>>>>> loose_provisioning=FALSE, autheticated=TRUE
>>>>>>>>> [DEBUG] [USER] SqlStateMachine(): init
>>>>>>>>> [DEBUG] [USER] Backend implementation of IStateMachine:
>>>>>>>>> activesync_statemachine
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion().
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetStateVersion(): supporting  
>>>>>>>>> version '2'
>>>>>>>>> [DEBUG] [USER] Request::ProcessHeaders() ASVersion: 14.0
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsProvisioning(9): true
>>>>>>>>> [DEBUG] [USER] SqlStateMachine->GetState():
>>>>>>>>> devid:'android0000000000000' type:'devicedata' key:'null'  
>>>>>>>>> counter:'false'
>>>>>>>>> [DEBUG] [USER] ASDevice data loaded for user: 'USER'
>>>>>>>>> [DEBUG] [USER] TopCollector initialised with IPC provider
>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>> [DEBUG] [USER] LoopDetection initialised with IPC provider
>>>>>>>>> 'activesync_ipc_backend'
>>>>>>>>> [DEBUG] [USER] ZPush::HierarchyCommand(9): true
>>>>>>>>> [DEBUG] [USER] DeviceManager->ProvisioningRequired('476502111') saved
>>>>>>>>> device key '476502111': false
>>>>>>>>> [DEBUG] [USER] DeviceManager->getPolicyName(): determined policy name:
>>>>>>>>> 'default'
>>>>>>>>> [DEBUG] [USER] DeviceManager->getProvisioningPolicies(): loaded
>>>>>>>>> 'default' policy.
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsAuthentication(9): true
>>>>>>>>> [DEBUG] [USER] activesync_backend::Logon('USER','',...) logon SUCCESS
>>>>>>>>> [DEBUG] [USER] ZPush::CommandNeedsPlainInput(9): false
>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:FolderSync>
>>>>>>>>> [WBXML] [USER] I <FolderHierarchy:SyncKey>
>>>>>>>>> [WBXML] [USER] I 0
>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:SyncKey>
>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedProtocolVersions(): 12.0,12.1,14.0
>>>>>>>>> [DEBUG] [USER] ZPush::GetSupportedCommands():
>>>>>>>>> Sync,SendMail,SmartForward,SmartReply,GetAttachment,GetHierarchy,CreateCollection,DeleteCollection,MoveCollection,FolderSync,FolderCreate,FolderDelete,FolderUpdate,MoveItems,GetItemEstimate,MeetingResponse,ResolveRecipients,ValidateCert,Provision,Search,Ping,Notify,ItemOperations,Settings
>>>>>>>>> [DEBUG] [USER] ASDevice->GetHierarchyCache(): HierarchyCache is up -
>>>>>>>>> Cached objects: 0
>>>>>>>>> [WBXML] [USER] I </FolderHierarchy:FolderSync>
>>>>>>>>> [DEBUG] [USER] WBXMLEncoder->startWBXML() type: vnd.ms-sync.wbxml
>>>>>>>>> [DEBUG] [USER] Initializing folder diff engine
>>>>>>>>> [DEBUG] [USER] ExportChangesDiff->InitializeExporter(): Initializing
>>>>>>>>> folder diff engine
>>>>>>>>> [ERROR] [USER] GetFolderList() Error happend in mail No session
>>>>>>>>> password available! blocking for 30 seconds for Instance=default,
>>>>>>>>> User=USER, Device:android0000000000000
>>>>>>>>> [ERROR] [USER] HTTPReturnCodeException: Service Unavailable - code:
>>>>>>>>> 503 - file:  
>>>>>>>>> /www/egw/activesync/inc/class.activesync_backend.inc.php:1480
>>>>>>>>> [ INFO] [USER] User-agent: 'Android-Mail/6.5-1.123769152.release'
>>>>>>>>> [FATAL] [USER] Exception: (HTTPReturnCodeException) - Service  
>>>>>>>>> Unavailable
>>>>>>>>> [DEBUG] [USER] LoopDetection->ProcessLoopDetectionTerminate()
>>>>>>>>> [ INFO] [USER] cmd='FolderSync' memory='2.61 MiB/4.00 MiB'
>>>>>>>>> time='0.16s' devType='Android' devId='android0000000000000'
>>>>>>>>> getUser='USER' from='MY_IP' version='EGroupware-16.1.20160603'
>>>>>>>>> method='POST' httpcode='503'
>>>>>>>>> [DEBUG] [USER] -------- End/
>>>>>>>>>
>>>>>>>>> Wo liegt der Fehler, dass die synchronisation nicht klappt?
>>>>>>>>> Konto wurde zuvor neu eingerichtet
>>>>>>>>> Android 5.1.1
>>>>>>>>> Alle Apps aktuell.
>>>>>>>>>
>>>>>>>>> VG
>>>> --
>>>> Ralf Becker
>>>> Director Software Development
>>>>
>>>> Stylite AG
>>>>
>>>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>>>> D-55124 Mainz | Fax. +49 6131 32702-70
>>>>
>>>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>>>
>>>> Managing Directors: Andre Keller | Gudrun Mueller
>>>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>>>
>>>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>>>
>>>>
>>>>
>>> __________________________________________________
>>>> --------------------------------------------------------------------
>>>> ----------
>>>> What NetFlow Analyzer can do for you? Monitors network bandwidth  
>>>> and traffic
>>>> patterns at an interface-level. Reveals which users, apps, and  
>>>> protocols are consuming the most bandwidth. Provides multi-vendor  
>>>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>>>> decisions using capacity planning
>>>> reports.http://sdm.link/zohodev2dev
>>> __________________________________________________
>>>> _______________________________________________
>>>> egroupware-german mailing list
>>>> [hidden email]  
>>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
>>> patterns at an interface-level. Reveals which users, apps, and  
>>> protocols are consuming the most bandwidth. Provides multi-vendor  
>>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>>> decisions using capacity planning
>>> reports.http://sdm.link/zohodev2dev
>>> _______________________________________________
>>> egroupware-german mailing list
>>> [hidden email]  
>>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>
>> --
>> Ralf Becker
>> Director Software Development
>>
>> Stylite AG
>>
>> Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
>> D-55124 Mainz | Fax. +49 6131 32702-70
>>
>> Email: [hidden email] www.stylite.de | www.egroupware.org
>>
>> Managing Directors: Andre Keller | Gudrun Mueller
>> Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer
>>
>> VAT DE214280951 | Registered HRB 46224 Mainz Germany
>>
>>
>>
> __________________________________________________
>> --------------------------------------------------------------------
>> ----------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
>> patterns at an interface-level. Reveals which users, apps, and  
>> protocols are consuming the most bandwidth. Provides multi-vendor  
>> support for NetFlow, J-Flow, sFlow and other flows. Make informed  
>> decisions using capacity planning
>> reports.http://sdm.link/zohodev2dev
> __________________________________________________
>> _______________________________________________
>> egroupware-german mailing list
>> [hidden email]  
>> https://lists.sourceforge.net/lists/listinfo/egroupware-german
>>
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> egroupware-german mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/egroupware-german

--
Ralf Becker
Director Software Development

Stylite AG

Isaac-Fulda-Allee 9 | Tel. +49 6131 32702-0
D-55124 Mainz       | Fax. +49 6131 32702-70

Email: [hidden email]

www.stylite.de | www.egroupware.org

Managing Directors: Andre Keller | Gudrun Mueller
Chairman of the supervisory board: Prof. Dr. Birger Leon Kropshofer

VAT DE214280951 | Registered HRB 46224 Mainz Germany



------------------------------------------------------------------------------

_______________________________________________
egroupware-german mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/egroupware-german

signature.asc (817 bytes) Download Attachment